Dimensional lobby signage for JP Cullen Corporate office lobby
The graphics provided a chronology of Company history, leadership and successes. The Company history spanned from 1892 to present.
Signage base layer consisted of three (3) sheets of 3/16” PETG which were 72” (w) X 48” (h). All these clear PETG boards were direct printed second-surface (aka: backside) on the FUJI Acuity flatbed device. All the boards involved in the project required custom cutting and precise mounting hole routing on the Zund.
Signage second layer consisted of nine (9) sheets of 3/16” PETG which were 16” (w) X 16” (h). All these clear PETG boards were direct printed second-surface on the FUJI Acuity flatbed device.
These boards were hung and mounted with custom fabricated stand-off devices. The stand-off’s were designed and manufactured by the customer. Due to final weight of this dimensional signage along with the wall composition made the installation very challenging. The wall composition consisted of drywall flush against a composite whisper board which was flush against cinder block. Wall anchors needed to be modified to account for the sign weight and stability. A total of 48 stand-off’s (16 per board) were used to hang and secure the signage.
The installation took approximately 4 hours and was finished ahead of the customers Open House event that evening.